One reason why your car’s remote key can’t be opened is a key battery that will start running out. Initial symptoms, the remote will be a little difficult when used, but the remote will function when we press the button continuously. This error is also rare. When the key battery is completely empty, the remote will not function at all. The reason is because the transmitter in the key also requires a voltage source. The voltage source used is small, so it is enough to use a battery knob or a round flat shape with a diameter of about 2 cm or less. Do you need to hire Locksmith mornington for such this problem of the key system of your car?
If this battery runs out of power, the transmitter automatically does not have enough voltage to function. The solution you need to replace the remote battery, this battery is sold in many electronics stores and general workshops. In the steps below we will explain the steps to repair the key by replacing the battery. For the first step, make sure you have prepared a new battery and some tools such as a screwdriver plus a flat screwdriver.
Also keep in mind, each key has a different cover flow. There are also clamps that use screws, for that before you open the key cover, first examine the key cover connection line. First, separate the key thread area with the remote component. If the key is connected to the remote, you can immediately remove the cover. When separating the key thread area, you can use a flat screwdriver or a knife with a note that there are no more screws that connect it. Continue by opening the key cover, such as beginning to carefully cover the area to find the screw. If no key is found using the clamping system, you can immediately pry it carefully using flat objects.